SatStation
Don’t let your Iridium satellite phone run “out of juice” when you need it most.
Keep your entire fleet of Iridium satellite phones (9500, 9505, 9505A, and 9555 models) charged and ready to deploy with the SatStation Battery Charger.
Available in a four-bay and single-bay models, the SatStation Battery Charger is the perfect solution for those who need their handsets ready at all times.
Features
- Capable of conditioning and rapid charging Iridium batteries in the same unit; in a single process without ever draining the battery
- Charge at current rates recommended by the battery manufacturer
- Be suitable to operate in the office (AC) as well as in the vehicle (DC)
- Switch to maintenance mode once the battery is fully charged. In the maintenance mode the battery is kept at peak conditions for as long as it is left on the unit without overheating or overcharging
Optional vehicular mounting kits and DC chargers are also available.
For more price information please contact one of our offices. For contact details click here.
SatStation Specifications
| Operating Temperature |
-20C to +50C |
| Storage Temperature |
-10°C to 70°C |
| Interfaces |
2.5 mm center positive socket |
| General |
Switching Power Circuit: On board to minimize heat generation
Charging System (battery alone): High current charge with regularly spaced negative pulses
Charging Chemistries: Indistinctively charges Ni-Cd and/or NiMH Batteries
Dual Power Source AC-DC: operate indistinctively from AC and/or DC |
| Relative Humidity |
95% maximum non condensing |
| Optional Equipment |
DC charger available |
| DC input range |
12V DC ±20% 800 mAh ±10% |
| Battery and Recharge Time |
90 minutes for 100% |
| Weight |
226.8 g / 8 oz |
| Size |
15.24 x 9.52 x 3.175 cm / 6 x 3.75 x 1.25 in |
|
